Tips to keep security cameras working in Winter

Cold weather can wreak havoc on your video surveillance system, but making sure that your cameras can survive the Winter is sometimes an afterthought that occurs only when below-freezing temperatures have hampered their performance. Here is Dahua’s checklist to keep your security solution up and running during the coldest months of the year.

Select a high IP rating

Cameras in cold climates need a weather-rated enclosure of at least IP66 to withstand harsh weather like snow and sleet. In addition, these enclosures should be checked regularly to make sure the seals are still tight. Humidity can cause condensation to accumulate inside the camera and turn to frost. Because of this, you should also take caution when moving a device from extreme cold to a fairly warm environment. If condensation is bad enough, it could short circuit internal components.

Look for temperature-tolerant cameras

Sometimes, double-checking the temperature rating when specifying a camera is all it takes to keep a video surveillance system up and running in cold environments. There are two main specs to understand: storage temperature and operating temperature.

Storage temperature is the temperature at which the equipment can be safely stored when it is powered off. Operating temperature is the air temperature of the environment when the equipment is powered on. If a camera has been stored below the recommended operating temperature, you should let it warm up in a warm environment, with the power off, until it reaches the operating temp.

To be sure you are specifying the right temperature-rated camera, our datasheets list a minimum and maximum operating temperature, as well as a storage temperature range. Extensive tests are performed to ensure our devices meet these climate conditions.

Remember other components

Cameras are not your only concern! Low temperatures can affect other electronics. Wind and snow can quickly degrade improperly specified cable and unprotected connectors outdoors.

Surveillance components like NVRs with hard drives and LCD monitors will usually be in temperature-controlled environments so there’s little worry. However, there’s risk if those devices have been stored overnight in a vehicle outdoors in below-freezing weather and then immediately installed and powered on. Hard drives can fail or sustain damage because their lubricants thicken. LCD screens contain liquid, which can freeze and damage pixels.

Check security components in exterior locations before the seasonal temperature drops.

Dahua Cameras

An example of a Dahua camera that is suitable for extreme weather conditions is the SD65F230F-HNI ultra-speed dome camera. It offers an optical zoom capability and pant/tilt/zoom functions, allowing the camera to catch every angle of the scene. It features Starlight technology that enables it to capture clear images even in low-light conditions.

Temperature resistance is a critical aspect of any security solution and should be carefully considered when choosing a camera. Whether it is rain, ice, snow, or heat, an outdoor surveillance camera is subject to extreme weather conditions that can cause components to fail or freeze. Thus, choosing the right camera for your surveillance monitoring based on the nature of the scene is of paramount importance.

Media contact

Rebecca Morpeth Spayne,
Editor, Security Portfolio
Tel: +44 (0) 1622 823 922
Email: [email protected]

Georgina Turner image

Georgina Turner

Sales Manager

Read the Latest Issue

Follow us on X

Follow us on X

Click Here

Follow us on LinkedIn

Follow us on LinkedIn

Click Here

Advertise here

Reach decision makers and amplify your marketing

Advertise here

Click Here

Related News

Graphic displaying a lockdown solution

Netgenium debuts next gen display and touchscreen technologies

Power-over-Ethernet (PoE) solutions specialist Netgenium will be showcasing its new range of IP…

ICT® Launches New TSL Access Reader Series

Integrated Control Technology (ICT®), a leading manufacturer of intelligent access control and…
Image Provided by Paxton

Paxton Partners with Skills for Security

The security technology manufacturer Paxton is proud to announce a partnership with Skills for Security…
Image Provided by ICT

ICT and Ingram Micro sign distribution agreement MEA

Integrated Control Technology (ICT), award-winning global manufacturer of intelligent electronic access control and security solutions..
Image Provided by Toshiba

Toshiba launches new HDD Innovation Lab

Toshiba Electronics Europe GmbH (Toshiba) has inaugurated a new HDD Innovation Laboratory (HDD Innovation Lab) at its site in Düsseldorf..
Image Provided by Verkada

Verkada Doubles Down on the Channel with Strategic New Hire

Verkada, a leader in cloud-based physical security, today announced the appointment of Micah Deriso as Head of Global Channel…
Image Provided by IPSA

IPSA Appoint Frontline Hero as Ambassador

Abdullah, the courageous security officer praised for foiling a horrific knife attack at Leicester Square, has been appointed as…
Image Provided by Codelocks

New Surface Latch from Codelocks

Codelocks is expanding its Gate Solutions by Codelocks range with the introduction of the new Codelocks’ Surface Latch…
Image provided by Genetec

Nicholas Smith to Lead Genetec UK and Ireland Operations

Genetec, provider of enterprise physical security software, announced the appointment of Nicholas Smith as its new Regional Sales Director…

News Desk

View all the latest, product, project and people news

News Desk

Click Here

Technology News

Keep up-to-date with the latest product innovation

Technology News

Click Here

Industry Sectors

Discover technology in action in all applications

Industry Sectors

Click Here

Enter The Awards

Showcase personal or organisation excellence

Advertise With Us

Reach decision makers and amplify your marketing

Advertise With Us

Click Here
Scroll to Top